Hydrothermal carbonization of lignocellulosic biomass: Effect of process conditions on hydrochar properties

[Display omitted] •Effect and statistical significance of process conditions on hydrochar properties.•Reaction temperature had 3–7 times the effect of retention time.•Predicted solid yields decreased to approx. 40% at higher temperatures.•Predicted energy densification and energy yields within 1–1.5...

Full description

Saved in:
Bibliographic Details
Published in:Applied energy 2015-10, Vol.155, p.576-584
Main Authors: Mäkelä, Mikko, Benavente, Verónica, Fullana, Andrés
Format: Article
Language:English
Subjects:
Annan kemiteknik
Biosolids
Chemical Process Engineering
Experimental design
Förnyelsebar bioenergi
Hydrothermal treatment
Kemiska processer
Other Chemical Engineering
Renewable Bioenergy Research
Response surface methodology
Sludge
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:[Display omitted] •Effect and statistical significance of process conditions on hydrochar properties.•Reaction temperature had 3–7 times the effect of retention time.•Predicted solid yields decreased to approx. 40% at higher temperatures.•Predicted energy densification and energy yields within 1–1.5 and 60–100%.•Attained results enable future prediction of hydrochar properties. Although hydrothermal carbonization of biomass components is known to be mainly governed by reaction temperature, consistent reports on the effect and statistical significance of process conditions on hydrochar properties are still lacking. The objective of this research was to determine the importance and significance of reaction temperature, retention time and solid load on the properties of hydrochar produced from an industrial lignocellulosic sludge residue. According to the results, reaction temperature and retention time had a statistically significant effect on hydrochar ash content, solid yield, carbon content, O/C-ratio, energy densification and energy yield as reactor solid load was statistically insignificant for all acquired models within the design range. Although statistically significant, the effect of retention time was 3–7 times lower than that of reaction temperature. Predicted dry ash-free solid yields of attained hydrochar decreased to approximately 40% due to the dissolution of biomass components at higher reaction temperatures, as respective oxygen contents were comparable to subbituminous coal. Significant increases in the carbon contents of hydrochar led to predicted energy densification ratios of 1–1.5 with respective energy yields of 60–100%. Estimated theoretical energy requirements of carbonization were dependent on the literature method used and mainly controlled by reaction temperature and reactor solid load. The attained results enable future prediction of hydrochar properties from this feedstock and help to understand the effect of process conditions on hydrothermal treatment of lignocellulosic biomass.
ISSN:0306-2619
1872-9118
1872-9118
DOI:10.1016/j.apenergy.2015.06.022