Pore geometry effects on intrapore viscous to inertial flows and on effective hydraulic parameters

Key Points Pore geometry factor β can predict hydraulic conductivity K Hydraulic conductivity is controlled by local friction drag near pore throats β is indicator of non‐linear characteristics during Forchheimer flows In this article, the effects of different diverging‐converging pore geometries we...

Full description

Saved in:
Bibliographic Details
Published in:Water resources research 2013-02, Vol.49 (2), p.1149-1162
Main Authors: Chaudhary, Kuldeep, Cardenas, M. Bayani, Deng, Wen, Bennett, Philip C.
Format: Article
Language:English
Subjects:
eddies
Forchheimer
friction drag
Geometry
Hydraulics
Marine
non-Darcy flow
pore geometry factor
pore-scale permeability
Reynolds number
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Key Points Pore geometry factor β can predict hydraulic conductivity K Hydraulic conductivity is controlled by local friction drag near pore throats β is indicator of non‐linear characteristics during Forchheimer flows In this article, the effects of different diverging‐converging pore geometries were investigated, and the microscale fluid flow and effective hydraulic properties from these pores were compared with that of a pipe from viscous to inertial laminar flow regimes. The flow fields are obtained using computational fluid dynamics, and the comparative analysis is based on a new dimensionless hydraulic shape factor β, which is the “specific surface” scaled by the length of pores. Results from all diverging‐converging pores show an inverse pattern in velocity and vorticity distributions relative to the pipe flow. The hydraulic conductivity K of all pores is dependent on and can be predicted from β with a power function with an exponent of 3/2. The differences in K are due to the differences in distribution of local friction drag on the pore walls. At Reynolds number (Re) ∼ 0 flows, viscous eddies are found to exist almost in all pores in different sizes, but not in the pipe. Eddies grow when Re → 1 and leads to the failure of Darcy's law. During non‐Darcy or Forchheimer flows, the apparent hydraulic conductivity Ka decreases due to the growth of eddies, which constricts the bulk flow region. At Re > 1, the rate of decrease in Ka increases, and at Re >> 1, it decreases to where the change in Ka ≈ 0, and flows once again exhibits a Darcy‐type relationship. The degree of nonlinearity during non‐Darcy flow decreases for pores with increasing β. The nonlinear flow behavior becomes weaker as β increases to its maximum value in the pipe, which shows no nonlinearity in the flow; in essence, Darcy's law stays valid in the pipe at all laminar flow conditions. The diverging‐converging geometry in pores plays a critical role in modifying the intrapore fluid flow, implying that this property should be incorporated in effective larger‐scale models, e.g., pore‐network models.
ISSN:0043-1397
1944-7973
DOI:10.1002/wrcr.20099