Loading…
Experimental investigation on the drying process of the sinter mixture
Achieving efficient recovery and utilization of waste heat during sintering is crucial for iron and steel plants. Previous studies on waste heat utilization have shown that steam and electricity are generated, after which the air and sinter mixture is preheated. However, few studies on the mechanism...
Saved in:
Published in: | Powder technology 2012-03, Vol.218, p.1-4 |
---|---|
Main Authors: | , , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Achieving efficient recovery and utilization of waste heat during sintering is crucial for iron and steel plants. Previous studies on waste heat utilization have shown that steam and electricity are generated, after which the air and sinter mixture is preheated. However, few studies on the mechanisms of the drying process of the sinter mixture exist. This paper presents the results of an experimental investigation on the drying process that occurs during sintering. The results show that the drying process of the sinter mixture consists of three stages, namely, a short rising-rate stage, a long constant-rate stage, and a falling-rate stage. The moisture contents of specimens are 0.055–0.06
kg/kg in the first 5–7
min, and the critical moisture contents are approximately 0.023–0.03
kg/kg. The drying efficiency is mainly attributed to the temperature and the flow rate of the hot air, and the former one is more significant.
The moisture contents of specimens are 0.055
–
0.06
kg/kg in the first 5
–
7
min, and the critical moisture contents are approximately 0.023
–
0.03
kg/kg. The drying efficiency is mainly attributed to the temperature and the flow rate of the hot air, and the hot air temperature is more significant.
[Display omitted]
► We perform the experiments which describe the sinter mixture's drying fundamental. ► We find the drying process of sinter mixture consists of three stages. ► The sinter mixture’s critical moisture content ranges from 0.023 kg/kg-0.03 kg/kg. ► Increasing hot air flow rate and temperature will shorten the drying time. ► The hot air temperature has more influence on the drying time. |
---|---|
ISSN: | 0032-5910 1873-328X |
DOI: | 10.1016/j.powtec.2011.10.063 |