Rapid surface finishing of chemical vapour deposited tungsten carbide hard coatings by electropolishing

Tungsten/tungsten carbide (W/WC) coatings deposited through chemical vapour deposition (CVD) exhibit favourable mechanical properties and are widely used to extend the working life and performance of engineering parts which operate in high wear and corrosive environments. Following the coating depos...

Full description

Saved in:
Bibliographic Details
Published in:Surface & coatings technology 2021-12, Vol.428, p.127900, Article 127900
Main Authors: Micallef, Christian, Chiu, Cheng-Wei, Zhuk, Yuri, Aria, Adrianus Indrat
Format: Article
Language:English
Subjects:
Chemical vapor deposition
Chemical vapour deposition
Coatings
Electrolytes
Electropolishing
Finishing
Hardness
Machinability
Machining
Mechanical properties
Monolithic materials
Sodium hydroxide
Surface finish
Surface finishing
Surface roughness
Thickness
Tungsten carbide
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Tungsten/tungsten carbide (W/WC) coatings deposited through chemical vapour deposition (CVD) exhibit favourable mechanical properties and are widely used to extend the working life and performance of engineering parts which operate in high wear and corrosive environments. Following the coating deposition process, the coated parts must adhere to low surface roughness and geometrical tolerance specifications necessitating the need of a machining or surface finishing operation. Unlike monolithic materials, hard W/WC coatings have low machinability due to their high hardness and superior mechanical properties. In this study, electropolishing, which is independent of the material's hardness and capable of processing parts with complex geometries has been studied as a prospective noncontact machining and surface finishing technique for CVD W/WC coatings. Here we report the electropolishing behaviour of W/WC coatings with an average thickness of 50 ± 15 μm and 1300 ± 50 HV hardness. Optimal electropolishing parameters using 5 wt% sodium hydroxide (NaOH) electrolyte concentration at 21 °C allow a mirror-like surface finish with Ra of less than 50 nm and a change in coating thickness of up to 18 μm to be achieved within 5 min. The change in electrolyte temperature from 21 °C to 40 °C was found to have a significant effect on the electropolishing behaviour due to the formation of a thin and unstable viscous film. The electrolyte concertation of 5 wt% was more stable when compare to 3 wt%, giving an overall better surface finish. EBSD analysis revealed that grains with a {111} orientation were preferentially etched in NaOH. [Display omitted] A suitable electropolishing process for surface finishing and machining W/WC coatings deposited through chemical vapour deposition has been developed.•A mirror-like surface finish with Ra of less than 50 nm was achieved in 5 wt% NaOH•Preferential grain etching along the {111} grain orientation occurred•Electrochemical machining was achieved with a coating removal of up to 18 μm•Inferior electropolishing results obtained with elevated electrolyte temperatures
ISSN:0257-8972
1879-3347
DOI:10.1016/j.surfcoat.2021.127900