Design, imaging and performance of 3D printed open‐cell architectures for porous electrodes: quantification of surface area and permeability

BACKGROUND The development of new open‐cell porous electrodes for electrochemical flow cells and reactors is demonstrated through the application of 3D printing. The properties of diverse architectures were investigated, including rectangular, circular, hexagonal and triangular cells with linear por...

Full description

Saved in:
Bibliographic Details
Published in:Journal of chemical technology and biotechnology (1986) 2021-07, Vol.96 (7), p.1818-1831
Main Authors: Kaishubayeva, Nazira, Ponce de León, Carlos, Walsh, Frank C, Arenas, Luis F
Format: Article
Language:English
Subjects:
additive manufacturing
Algorithms
Biotechnology
Chemical technology
Computational fluid dynamics
Computed tomography
Electrochemistry
electrode design
Electrodes
Fluid flow
Friction factor
Laser beam melting
Optimization
periodic cell
Permeability
Porosity
Pressure drop
Reactors
Reynolds number
Scanning electron microscopy
Stainless steel
Stainless steels
Surface area
Surface roughness
Three dimensional printing
Tomography
X‐ray computed tomography
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:BACKGROUND The development of new open‐cell porous electrodes for electrochemical flow cells and reactors is demonstrated through the application of 3D printing. The properties of diverse architectures were investigated, including rectangular, circular, hexagonal and triangular cells with linear porosity grades of 10, 20 and 30 pores per inch (ppi). Specimens were digitally designed, then 3D printed in stainless steel via selective laser melting. After being examined using scanning electron microscopy, they were characterized in terms of volumetric surface area and porosity with the aid of X‐ray computed tomography. Pressure drop measurements were performed over a range of mean linear velocity and Reynolds number, allowing the estimation of Darcy's friction factor and permeability. RESULTS Volumetric surface area estimated from tomography scans was ≤36% higher than the nominal values owing to surface roughness and post‐processing algorithms. By contrast, volumetric porosity obtained by tomography agreed fully with measured values. Triangular architectures afforded additional surface area both digitally and according to tomography. The largest pressure drop was found in circular materials, the triangular ones showing the lowest. The 20 ppi triangular architecture had a volumetric surface area of ≈44.5 cm−1 and a permeability of 2.31 × 10−5 cm2. CONCLUSION Triangular architectures were preferred as a consequence of their favourable combination of high surface area and high permeability with low mass and reduced digital complexity. This provides a strategy to initiate the optimization of 3D printed porous electrodes for electrochemical flow cells and reactors in novel and niche applications. © 2021 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).
ISSN:0268-2575
1097-4660
DOI:10.1002/jctb.6754