3D numerical investigations of the effect of fill factor on dispersive and distributive mixing of rubber under non‐isothermal conditions

Three‐dimensional, non‐isothermal, transient computational fluid dynamics simulations are conducted for rubber mixing with a set of two‐wing rotors in a partially filled chamber. The main objective is to analyze the effect of different fill factors of rubber on dispersive and distributive mixing cha...

Full description

Saved in:
Bibliographic Details
Published in:Polymer engineering and science 2019-03, Vol.59 (3), p.535-546
Main Authors: Ahmed, Istiaque, Chandy, Abhilash J.
Format: Article
Language:English
Subjects:
Aerodynamics
Computational fluid dynamics
Computer simulation
Free surfaces
Mathematical analysis
Mathematical models
Polymers
Rotors
Rubber
Shear rate
Temperature dependence
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Three‐dimensional, non‐isothermal, transient computational fluid dynamics simulations are conducted for rubber mixing with a set of two‐wing rotors in a partially filled chamber. The main objective is to analyze the effect of different fill factors of rubber on dispersive and distributive mixing characteristics by simulating 15 revolutions of the rotors rotating at 20 rpm. 60%, 70%, 75%, and 80% are the four different fill factors chosen for the study. An Eulerian multiphase model is employed to simulate two different phases, rubber and air, and the volume of fluid technique is used to calculate the free surface between two phases, in addition to the continuity, momentum and Energy equations. To characterize non‐Newtonian, highly viscous rubber, shear rate and temperature dependent Carreau‐Yasuda model has been used. A set of more than 3,600 massless particles are injected after a certain period of time to calculate several quantities in terms of dispersive and distributive mixing. Both the Eulerian and Lagrangian results showed that, fill factors between 70% and 80% presented the most reasonable and efficient mixing scenario, thus exhibiting the best dispersive and distributive mixing characteristics combined. POLYM. ENG. SCI., 59:535–546, 2019. © 2018 Society of Plastics Engineers
ISSN:0032-3888
1548-2634
DOI:10.1002/pen.24963