Loading…
Nd:YAG pulsed laser welding of TC4 Ti alloy to 301L stainless steel using Ta/V/Fe composite interlayer
•The possibility of two pass welding for Ti alloy-SS joint with Ta/V/Fe as composite interlayer was studied.•The unmelted V interlayer prevented the formation of brittle Ti-Fe intermetallics.•Microstructures and mechanical properties of joints were improved by adding Ta/V/Fe composite interlayer. Th...
Saved in:
Published in: | Materials letters 2018-02, Vol.212, p.54-57 |
---|---|
Main Authors: | , , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | •The possibility of two pass welding for Ti alloy-SS joint with Ta/V/Fe as composite interlayer was studied.•The unmelted V interlayer prevented the formation of brittle Ti-Fe intermetallics.•Microstructures and mechanical properties of joints were improved by adding Ta/V/Fe composite interlayer.
The present article reports the feasibility of Nd:YAG laser welding of Ti alloy to stainless steel through composite layer Ta/V/Fe. The laser beam was focused on the centerline of Ta and Fe sheets respectively to ensure that V interlayer was not completely melted. Two pass welding was employed involving creation of a joint with two weld zones separated by remaining unmelted V. Composite interlayer Ta/V/Fe was used to prevent the formation of Ti-Fe intermetallics and improve microstructure and properties of the Ti alloy-SS joint. The joint fractured at the unmelted V with the tensile strength of 627 MPa. |
---|---|
ISSN: | 0167-577X 1873-4979 |
DOI: | 10.1016/j.matlet.2017.10.057 |