High conductivity n-Al 0.6 Ga 0.4 N by ammonia-assisted molecular beam epitaxy for buried tunnel junctions in UV emitters

Highly doped n-Al 0.6 Ga 0.4 N can be used to form tunnel junctions (TJs) on deep ultraviolet (UVC) LEDs and markedly increase the light extraction efficiency (LEE) compared to the use of p-GaN/p-AlGaN. High quality Al 0.6 Ga 0.4 N was grown by NH 3 -assisted molecular beam epitaxy (NH 3 MBE) on top...

Full description

Saved in:
Bibliographic Details
Published in:Optics express 2021-12, Vol.29 (25), p.40781
Main Authors: Wang, Jianfeng, SaifAddin, Burhan K., Zollner, Christian J., Bonef, Bastien, Almogbel, Abdullah S., Yao, Yifan, Iza, Michael, Zhang, Yuewei, Fireman, Micha N., Young, Erin C., DenBaars, Steven P., Nakamura, Shuji, Speck, James S.
Format: Article
Language:English
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Highly doped n-Al 0.6 Ga 0.4 N can be used to form tunnel junctions (TJs) on deep ultraviolet (UVC) LEDs and markedly increase the light extraction efficiency (LEE) compared to the use of p-GaN/p-AlGaN. High quality Al 0.6 Ga 0.4 N was grown by NH 3 -assisted molecular beam epitaxy (NH 3 MBE) on top of AlN on SiC substrate. The films were crack free under scanning electron microscope (SEM) for the thickness investigated (up to 1 µm). X-ray diffraction reciprocal space map scan was used to determine the Al composition and the result is in close agreement with atom probe tomography (APT) measurements. By varying the growth parameters including growth rate, and Si cell temperature, n-Al 0.6 Ga 0.4 N with an electron density of 4×10 19 /cm 3 and a resistivity of 3 mΩ·cm was achieved. SIMS measurement shows that a high Si doping level up to 2×10 20 /cm 3 can be realized using a Si cell temperature of 1450 °C and a growth rate of 210 nm/hr. Using a vanadium-based annealed contact, ohmic contact with a specific resistance of 10 −6 Ω·cm 2 was achieved as determined by circular transmission line measurement (CTLM). Finally, the n-type AlGaN regrowth was done on MOCVD grown UVC LEDs to form UVC TJ LED. The sample was processed into thin film flip chip (TFFC) configuration. The emission wavelength is around 278 nm and the excess voltage of processed UV LED is around 4.1 V.
ISSN:1094-4087
1094-4087
DOI:10.1364/OE.436153