Stress interference and interaction between two fractures during their propagation: insights from SCDA test and XFEM simulation
Understanding and predicting the propagation and disturbance of multiple fractures is the key to the successful implementation of hydraulic fracturing. In this study, the two-hole fracturing tests are carried out on granite samples by using soundless cracking demolition agent (SCDA). Combined with t...
Saved in:
| Published in: | International journal of rock mechanics and mining sciences (Oxford, England : 1997) England : 1997), 2023-09, Vol.169, p.105431, Article 105431 |
|---|---|
| Main Authors: | , , , , , |
| Format: | Article |
| Language: | eng |
| Subjects: | |
| Online Access: | Get full text |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Understanding and predicting the propagation and disturbance of multiple fractures is the key to the successful implementation of hydraulic fracturing. In this study, the two-hole fracturing tests are carried out on granite samples by using soundless cracking demolition agent (SCDA). Combined with the extended finite element method (XFEM) simulation and the induced stress analysis, the interaction and stress interference during the propagation of two fractures are systematically investigated. The relative position of two holes determines whether attraction or repulsion effect occurs between adjacent fractures, the pattern of which can be classified into three modes: the fracture collinear, staggered propagation and parallel propagation. The fractures in collinear pattern are prone to coalescence, the staggered fractures are easy to attract each other and the parallel fractures tend to propagate independently, which ultimately lead to the formation of single, spiral and multiple main fractures, respectively. The stress near the fracture tip controls the possibility and direction of fracture propagation. The superposition of tensile stress is prone to promote fracture propagation, and the stress interference tends to make fractures deflection and mutual exclusion. The fracturing results are quantitatively evaluated by using fractal dimension and fracture surface characteristics. It is found that increasing perforation spacing makes the degree of internal rupture of the sample increase first and then decrease, and the fracturing scheme is optimal when the perforations are arranged perpendicular to the direction of maximum horizontal principal stress.
•Interaction between two fractures are analyzed through SCDA test and XFEM simulation.•The theoretical model for stress distribution around two holes is established.•Three interaction modes are identified: collinear, staggered and parallel propagation.•The stress concentration around the fracture tip controls the fracture trajectories. |
|---|---|
| ISSN: | 1365-1609 1873-4545 |