Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films

Sr₂FeMoO₆ (SFMO) films were grown on SrTiO₃ (100)- and (111)-oriented substrates via pulsed laser deposition (PLD). In order to study the fundamental characteristics of deposition, films were grown in two different PLD chambers. In chamber I, the best films were grown with a relatively long substrat...

Full description

Saved in:
Bibliographic Details
Published in:Journal of applied physics 2014-07, Vol.116 (1)
Main Authors: Meyer, T. L., Woodward, P. M., Dixit, M., Williams, R. E. A., Susner, M. A., Fraser, H. L., McComb, D. W., Sumption, M. D., Lemberger, T. R.
Format: Article
Language:English
Subjects:
CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY
ENERGY BEAM DEPOSITION
EPITAXY
IRON COMPOUNDS
LASER RADIATION
LAYERS
MAGNETIC PROPERTIES
MAGNETIZATION
MOLYBDATES
RUTHERFORD BACKSCATTERING SPECTROSCOPY
SATURATION
STOICHIOMETRY
STRONTIUM COMPOUNDS
STRONTIUM OXIDES
STRONTIUM TITANATES
SUBSTRATES
X-RAY DIFFRACTION
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by
cites
container_end_page
container_issue 1
container_start_page
container_title Journal of applied physics
container_volume 116
creator Meyer, T. L.
Woodward, P. M.
Dixit, M.
Williams, R. E. A.
Susner, M. A.
Fraser, H. L.
McComb, D. W.
Sumption, M. D.
Lemberger, T. R.
description Sr₂FeMoO₆ (SFMO) films were grown on SrTiO₃ (100)- and (111)-oriented substrates via pulsed laser deposition (PLD). In order to study the fundamental characteristics of deposition, films were grown in two different PLD chambers. In chamber I, the best films were grown with a relatively long substrate-to-target distance (89 mm), high substrate temperature (850 °C), and low pressure (50 mTorr) in a 95% Ar/5% H₂ atmosphere. Although X-ray diffraction (XRD) measurements indicate these films are single phase, Rutherford Backscattering (RBS) measurements reveal considerable non-stoichiometry, corresponding to a Sr₂Fe{sub 1–x}Mo{sub 1+x}O₆ composition with x≅0.2–0.3. This level of non-stoichiometry results in inferior magnetic properties. In chamber II, the best films were grown with a much shorter substrate-to-target distance (38 mm), lower temperature (680 °C), and higher pressure (225 mTorr). XRD measurements show that the films are single phase, and RBS measurements indicate that they are nearly stoichiometric. The degree of ordering between Fe and Mo was dependent on both the temperature and pressure used during deposition, reaching a maximum order parameter of 85%. The saturation magnetization increases as the Fe/Mo ordering increases, reaching a maximum of 2.4 μB/f.u. Based on prior studies of bulk samples, one would expect a higher saturation magnetization for this degree of Fe/Mo order. The presence of extra strontium oxide layers in the form of Ruddlesden-Popper intergrowths appears to be responsible for the lower than expected saturation magnetization of these films.
doi_str_mv 10.1063/1.4885450
format article
fullrecord <record><control><sourceid>osti</sourceid><recordid>TN_cdi_osti_scitechconnect_22306247</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>22306247</sourcerecordid><originalsourceid>FETCH-osti_scitechconnect_223062473</originalsourceid><addsrcrecordid>eNqNjL1qwzAURkVpoe7P0DcQdAxKrmQ7lueQ0KV0aPagKgq-xZGMrwI2wUuGPGifJKbpA3T6zgeHw9iLhKmEeTqT00zrPMvhhiUSdCmKPIdblgAoKXRZlPfsgegbQEqdlgmrFiZi8NwHLygGtBWGvYttz9Hz5lCT2_LakGv51jWBMI7_sz3S4YurST-s3C_KSTe8hyuKbvj4OZ25azCaDk3Nd1jv6Ynd7cyYe_7bR_a6Wq4XbyJQxA3ZsWwrG7x3Nm6USmGusiL9n3UBTt5N2g</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films</title><source>American Institute of Physics:Jisc Collections:Transitional Journals Agreement 2021-23 (Reading list)</source><creator>Meyer, T. L. ; Woodward, P. M. ; Dixit, M. ; Williams, R. E. A. ; Susner, M. A. ; Fraser, H. L. ; McComb, D. W. ; Sumption, M. D. ; Lemberger, T. R.</creator><creatorcontrib>Meyer, T. L. ; Woodward, P. M. ; Dixit, M. ; Williams, R. E. A. ; Susner, M. A. ; Fraser, H. L. ; McComb, D. W. ; Sumption, M. D. ; Lemberger, T. R.</creatorcontrib><description>Sr₂FeMoO₆ (SFMO) films were grown on SrTiO₃ (100)- and (111)-oriented substrates via pulsed laser deposition (PLD). In order to study the fundamental characteristics of deposition, films were grown in two different PLD chambers. In chamber I, the best films were grown with a relatively long substrate-to-target distance (89 mm), high substrate temperature (850 °C), and low pressure (50 mTorr) in a 95% Ar/5% H₂ atmosphere. Although X-ray diffraction (XRD) measurements indicate these films are single phase, Rutherford Backscattering (RBS) measurements reveal considerable non-stoichiometry, corresponding to a Sr₂Fe{sub 1–x}Mo{sub 1+x}O₆ composition with x≅0.2–0.3. This level of non-stoichiometry results in inferior magnetic properties. In chamber II, the best films were grown with a much shorter substrate-to-target distance (38 mm), lower temperature (680 °C), and higher pressure (225 mTorr). XRD measurements show that the films are single phase, and RBS measurements indicate that they are nearly stoichiometric. The degree of ordering between Fe and Mo was dependent on both the temperature and pressure used during deposition, reaching a maximum order parameter of 85%. The saturation magnetization increases as the Fe/Mo ordering increases, reaching a maximum of 2.4 μB/f.u. Based on prior studies of bulk samples, one would expect a higher saturation magnetization for this degree of Fe/Mo order. The presence of extra strontium oxide layers in the form of Ruddlesden-Popper intergrowths appears to be responsible for the lower than expected saturation magnetization of these films.</description><identifier>ISSN: 0021-8979</identifier><identifier>EISSN: 1089-7550</identifier><identifier>DOI: 10.1063/1.4885450</identifier><language>eng</language><publisher>United States: American Institute of Physics (AIP)</publisher><subject>CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY ; ENERGY BEAM DEPOSITION ; EPITAXY ; IRON COMPOUNDS ; LASER RADIATION ; LAYERS ; MAGNETIC PROPERTIES ; MAGNETIZATION ; MOLYBDATES ; RUTHERFORD BACKSCATTERING SPECTROSCOPY ; SATURATION ; STOICHIOMETRY ; STRONTIUM COMPOUNDS ; STRONTIUM OXIDES ; STRONTIUM TITANATES ; SUBSTRATES ; X-RAY DIFFRACTION</subject><ispartof>Journal of applied physics, 2014-07, Vol.116 (1)</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>230,315,786,790,891,27957,27958</link.rule.ids><backlink>$$Uhttps://www.osti.gov/biblio/22306247$$D View this record in Osti.gov$$Hfree_for_read</backlink></links><search><creatorcontrib>Meyer, T. L.</creatorcontrib><creatorcontrib>Woodward, P. M.</creatorcontrib><creatorcontrib>Dixit, M.</creatorcontrib><creatorcontrib>Williams, R. E. A.</creatorcontrib><creatorcontrib>Susner, M. A.</creatorcontrib><creatorcontrib>Fraser, H. L.</creatorcontrib><creatorcontrib>McComb, D. W.</creatorcontrib><creatorcontrib>Sumption, M. D.</creatorcontrib><creatorcontrib>Lemberger, T. R.</creatorcontrib><title>Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films</title><title>Journal of applied physics</title><description>Sr₂FeMoO₆ (SFMO) films were grown on SrTiO₃ (100)- and (111)-oriented substrates via pulsed laser deposition (PLD). In order to study the fundamental characteristics of deposition, films were grown in two different PLD chambers. In chamber I, the best films were grown with a relatively long substrate-to-target distance (89 mm), high substrate temperature (850 °C), and low pressure (50 mTorr) in a 95% Ar/5% H₂ atmosphere. Although X-ray diffraction (XRD) measurements indicate these films are single phase, Rutherford Backscattering (RBS) measurements reveal considerable non-stoichiometry, corresponding to a Sr₂Fe{sub 1–x}Mo{sub 1+x}O₆ composition with x≅0.2–0.3. This level of non-stoichiometry results in inferior magnetic properties. In chamber II, the best films were grown with a much shorter substrate-to-target distance (38 mm), lower temperature (680 °C), and higher pressure (225 mTorr). XRD measurements show that the films are single phase, and RBS measurements indicate that they are nearly stoichiometric. The degree of ordering between Fe and Mo was dependent on both the temperature and pressure used during deposition, reaching a maximum order parameter of 85%. The saturation magnetization increases as the Fe/Mo ordering increases, reaching a maximum of 2.4 μB/f.u. Based on prior studies of bulk samples, one would expect a higher saturation magnetization for this degree of Fe/Mo order. The presence of extra strontium oxide layers in the form of Ruddlesden-Popper intergrowths appears to be responsible for the lower than expected saturation magnetization of these films.</description><subject>CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY</subject><subject>ENERGY BEAM DEPOSITION</subject><subject>EPITAXY</subject><subject>IRON COMPOUNDS</subject><subject>LASER RADIATION</subject><subject>LAYERS</subject><subject>MAGNETIC PROPERTIES</subject><subject>MAGNETIZATION</subject><subject>MOLYBDATES</subject><subject>RUTHERFORD BACKSCATTERING SPECTROSCOPY</subject><subject>SATURATION</subject><subject>STOICHIOMETRY</subject><subject>STRONTIUM COMPOUNDS</subject><subject>STRONTIUM OXIDES</subject><subject>STRONTIUM TITANATES</subject><subject>SUBSTRATES</subject><subject>X-RAY DIFFRACTION</subject><issn>0021-8979</issn><issn>1089-7550</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2014</creationdate><recordtype>article</recordtype><recordid>eNqNjL1qwzAURkVpoe7P0DcQdAxKrmQ7lueQ0KV0aPagKgq-xZGMrwI2wUuGPGifJKbpA3T6zgeHw9iLhKmEeTqT00zrPMvhhiUSdCmKPIdblgAoKXRZlPfsgegbQEqdlgmrFiZi8NwHLygGtBWGvYttz9Hz5lCT2_LakGv51jWBMI7_sz3S4YurST-s3C_KSTe8hyuKbvj4OZ25azCaDk3Nd1jv6Ynd7cyYe_7bR_a6Wq4XbyJQxA3ZsWwrG7x3Nm6USmGusiL9n3UBTt5N2g</recordid><startdate>20140707</startdate><enddate>20140707</enddate><creator>Meyer, T. L.</creator><creator>Woodward, P. M.</creator><creator>Dixit, M.</creator><creator>Williams, R. E. A.</creator><creator>Susner, M. A.</creator><creator>Fraser, H. L.</creator><creator>McComb, D. W.</creator><creator>Sumption, M. D.</creator><creator>Lemberger, T. R.</creator><general>American Institute of Physics (AIP)</general><scope>OTOTI</scope></search><sort><creationdate>20140707</creationdate><title>Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films</title><author>Meyer, T. L. ; Woodward, P. M. ; Dixit, M. ; Williams, R. E. A. ; Susner, M. A. ; Fraser, H. L. ; McComb, D. W. ; Sumption, M. D. ; Lemberger, T. R.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-osti_scitechconnect_223062473</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2014</creationdate><topic>CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY</topic><topic>ENERGY BEAM DEPOSITION</topic><topic>EPITAXY</topic><topic>IRON COMPOUNDS</topic><topic>LASER RADIATION</topic><topic>LAYERS</topic><topic>MAGNETIC PROPERTIES</topic><topic>MAGNETIZATION</topic><topic>MOLYBDATES</topic><topic>RUTHERFORD BACKSCATTERING SPECTROSCOPY</topic><topic>SATURATION</topic><topic>STOICHIOMETRY</topic><topic>STRONTIUM COMPOUNDS</topic><topic>STRONTIUM OXIDES</topic><topic>STRONTIUM TITANATES</topic><topic>SUBSTRATES</topic><topic>X-RAY DIFFRACTION</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Meyer, T. L.</creatorcontrib><creatorcontrib>Woodward, P. M.</creatorcontrib><creatorcontrib>Dixit, M.</creatorcontrib><creatorcontrib>Williams, R. E. A.</creatorcontrib><creatorcontrib>Susner, M. A.</creatorcontrib><creatorcontrib>Fraser, H. L.</creatorcontrib><creatorcontrib>McComb, D. W.</creatorcontrib><creatorcontrib>Sumption, M. D.</creatorcontrib><creatorcontrib>Lemberger, T. R.</creatorcontrib><collection>OSTI.GOV</collection><jtitle>Journal of applied physics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Meyer, T. L.</au><au>Woodward, P. M.</au><au>Dixit, M.</au><au>Williams, R. E. A.</au><au>Susner, M. A.</au><au>Fraser, H. L.</au><au>McComb, D. W.</au><au>Sumption, M. D.</au><au>Lemberger, T. R.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films</atitle><jtitle>Journal of applied physics</jtitle><date>2014-07-07</date><risdate>2014</risdate><volume>116</volume><issue>1</issue><issn>0021-8979</issn><eissn>1089-7550</eissn><abstract>Sr₂FeMoO₆ (SFMO) films were grown on SrTiO₃ (100)- and (111)-oriented substrates via pulsed laser deposition (PLD). In order to study the fundamental characteristics of deposition, films were grown in two different PLD chambers. In chamber I, the best films were grown with a relatively long substrate-to-target distance (89 mm), high substrate temperature (850 °C), and low pressure (50 mTorr) in a 95% Ar/5% H₂ atmosphere. Although X-ray diffraction (XRD) measurements indicate these films are single phase, Rutherford Backscattering (RBS) measurements reveal considerable non-stoichiometry, corresponding to a Sr₂Fe{sub 1–x}Mo{sub 1+x}O₆ composition with x≅0.2–0.3. This level of non-stoichiometry results in inferior magnetic properties. In chamber II, the best films were grown with a much shorter substrate-to-target distance (38 mm), lower temperature (680 °C), and higher pressure (225 mTorr). XRD measurements show that the films are single phase, and RBS measurements indicate that they are nearly stoichiometric. The degree of ordering between Fe and Mo was dependent on both the temperature and pressure used during deposition, reaching a maximum order parameter of 85%. The saturation magnetization increases as the Fe/Mo ordering increases, reaching a maximum of 2.4 μB/f.u. Based on prior studies of bulk samples, one would expect a higher saturation magnetization for this degree of Fe/Mo order. The presence of extra strontium oxide layers in the form of Ruddlesden-Popper intergrowths appears to be responsible for the lower than expected saturation magnetization of these films.</abstract><cop>United States</cop><pub>American Institute of Physics (AIP)</pub><doi>10.1063/1.4885450</doi></addata></record>
fulltext fulltext
identifier ISSN: 0021-8979
ispartof Journal of applied physics, 2014-07, Vol.116 (1)
issn 0021-8979
1089-7550
language eng
recordid cdi_osti_scitechconnect_22306247
source American Institute of Physics:Jisc Collections:Transitional Journals Agreement 2021-23 (Reading list)
subjects CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY
ENERGY BEAM DEPOSITION
EPITAXY
IRON COMPOUNDS
LASER RADIATION
LAYERS
MAGNETIC PROPERTIES
MAGNETIZATION
MOLYBDATES
RUTHERFORD BACKSCATTERING SPECTROSCOPY
SATURATION
STOICHIOMETRY
STRONTIUM COMPOUNDS
STRONTIUM OXIDES
STRONTIUM TITANATES
SUBSTRATES
X-RAY DIFFRACTION
title Cation non-stoichiometry in pulsed laser deposited Sr{sub 2+y}Fe{sub 1+x}Mo{sub 1-x}O₆ epitaxial films
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-09-22T05%3A26%3A57IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-osti&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Cation%20non-stoichiometry%20in%20pulsed%20laser%20deposited%20Sr%7Bsub%202+y%7DFe%7Bsub%201+x%7DMo%7Bsub%201-x%7DO%E2%82%86%20epitaxial%20films&rft.jtitle=Journal%20of%20applied%20physics&rft.au=Meyer,%20T.%20L.&rft.date=2014-07-07&rft.volume=116&rft.issue=1&rft.issn=0021-8979&rft.eissn=1089-7550&rft_id=info:doi/10.1063/1.4885450&rft_dat=%3Costi%3E22306247%3C/osti%3E%3Cgrp_id%3Ecdi_FETCH-osti_scitechconnect_223062473%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true