'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System

This paper describes preliminary findings on an expert system that uses both operator and transducer inputs in 'almost' real-time to diagnose scrap type and recommend corrective action to reduce/eliminate further production of this scrap type. During the development of the expert system, e...

Full description

Saved in:
Bibliographic Details
Published in:SAE transactions 1987-01, Vol.96, p.1427-1433
Main Authors: Chesney, David R., Goodman, Erik D., Rieke, Michael W.
Format: Article
Language:English
Subjects:
Architectural engineering
Architecture
Chalkboards
Computer software
Expert systems
Foams
Knowledge engineering
Machinery
Molding
Transducers
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by
cites
container_end_page 1433
container_issue
container_start_page 1427
container_title SAE transactions
container_volume 96
creator Chesney, David R.
Goodman, Erik D.
Rieke, Michael W.
description This paper describes preliminary findings on an expert system that uses both operator and transducer inputs in 'almost' real-time to diagnose scrap type and recommend corrective action to reduce/eliminate further production of this scrap type. During the development of the expert system, equal consideration was given to hardware installation and debugging; system architecture, logic, and triggering; and knowledge acquisition. The system is applied to a specific manufacturing process; however, the ideas are applicable to a wide range of problems in the production environment.
format article
fullrecord <record><control><sourceid>jstor</sourceid><recordid>TN_cdi_jstor_primary_44470804</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><jstor_id>44470804</jstor_id><sourcerecordid>44470804</sourcerecordid><originalsourceid>FETCH-jstor_primary_444708043</originalsourceid><addsrcrecordid>eNqFybsKwjAUgOEgCtbLIwhn6xRIbWt0FC-4uNgKOsmhphJpkpKTgr69CO5O_wd_j0XzXEqe5GnSZ5EQqwWX6eIyZCOipxBpkst5xK7xujGOQgwnhQ0vtVGw1fiwjjQB2jtsnPeqCtpZcDUc0XY1VqHz2j6gqDy2cKav0cLu1SofoHhTUGbCBjU2pKa_jtlsvys3B_6k4Pyt9dqgf9-yLJNiKbL03_8AVc4-gA</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System</title><source>JSTOR Archival Journals and Primary Sources Collection</source><creator>Chesney, David R. ; Goodman, Erik D. ; Rieke, Michael W.</creator><creatorcontrib>Chesney, David R. ; Goodman, Erik D. ; Rieke, Michael W.</creatorcontrib><description>This paper describes preliminary findings on an expert system that uses both operator and transducer inputs in 'almost' real-time to diagnose scrap type and recommend corrective action to reduce/eliminate further production of this scrap type. During the development of the expert system, equal consideration was given to hardware installation and debugging; system architecture, logic, and triggering; and knowledge acquisition. The system is applied to a specific manufacturing process; however, the ideas are applicable to a wide range of problems in the production environment.</description><identifier>ISSN: 0096-736X</identifier><identifier>EISSN: 2577-1531</identifier><language>eng</language><publisher>Society of Automotive Engineers, Inc</publisher><subject>Architectural engineering ; Architecture ; Chalkboards ; Computer software ; Expert systems ; Foams ; Knowledge engineering ; Machinery ; Molding ; Transducers</subject><ispartof>SAE transactions, 1987-01, Vol.96, p.1427-1433</ispartof><rights>Copyright 1988 Society of Automotive Engineers, Inc.</rights><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://www.jstor.org/stable/pdf/44470804$$EPDF$$P50$$Gjstor$$H</linktopdf><linktohtml>$$Uhttps://www.jstor.org/stable/44470804$$EHTML$$P50$$Gjstor$$H</linktohtml><link.rule.ids>315,786,790,58593,58826</link.rule.ids></links><search><creatorcontrib>Chesney, David R.</creatorcontrib><creatorcontrib>Goodman, Erik D.</creatorcontrib><creatorcontrib>Rieke, Michael W.</creatorcontrib><title>'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System</title><title>SAE transactions</title><description>This paper describes preliminary findings on an expert system that uses both operator and transducer inputs in 'almost' real-time to diagnose scrap type and recommend corrective action to reduce/eliminate further production of this scrap type. During the development of the expert system, equal consideration was given to hardware installation and debugging; system architecture, logic, and triggering; and knowledge acquisition. The system is applied to a specific manufacturing process; however, the ideas are applicable to a wide range of problems in the production environment.</description><subject>Architectural engineering</subject><subject>Architecture</subject><subject>Chalkboards</subject><subject>Computer software</subject><subject>Expert systems</subject><subject>Foams</subject><subject>Knowledge engineering</subject><subject>Machinery</subject><subject>Molding</subject><subject>Transducers</subject><issn>0096-736X</issn><issn>2577-1531</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1987</creationdate><recordtype>article</recordtype><sourceid/><recordid>eNqFybsKwjAUgOEgCtbLIwhn6xRIbWt0FC-4uNgKOsmhphJpkpKTgr69CO5O_wd_j0XzXEqe5GnSZ5EQqwWX6eIyZCOipxBpkst5xK7xujGOQgwnhQ0vtVGw1fiwjjQB2jtsnPeqCtpZcDUc0XY1VqHz2j6gqDy2cKav0cLu1SofoHhTUGbCBjU2pKa_jtlsvys3B_6k4Pyt9dqgf9-yLJNiKbL03_8AVc4-gA</recordid><startdate>19870101</startdate><enddate>19870101</enddate><creator>Chesney, David R.</creator><creator>Goodman, Erik D.</creator><creator>Rieke, Michael W.</creator><general>Society of Automotive Engineers, Inc</general><scope/></search><sort><creationdate>19870101</creationdate><title>'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System</title><author>Chesney, David R. ; Goodman, Erik D. ; Rieke, Michael W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-jstor_primary_444708043</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1987</creationdate><topic>Architectural engineering</topic><topic>Architecture</topic><topic>Chalkboards</topic><topic>Computer software</topic><topic>Expert systems</topic><topic>Foams</topic><topic>Knowledge engineering</topic><topic>Machinery</topic><topic>Molding</topic><topic>Transducers</topic><toplevel>online_resources</toplevel><creatorcontrib>Chesney, David R.</creatorcontrib><creatorcontrib>Goodman, Erik D.</creatorcontrib><creatorcontrib>Rieke, Michael W.</creatorcontrib><jtitle>SAE transactions</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Chesney, David R.</au><au>Goodman, Erik D.</au><au>Rieke, Michael W.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System</atitle><jtitle>SAE transactions</jtitle><date>1987-01-01</date><risdate>1987</risdate><volume>96</volume><spage>1427</spage><epage>1433</epage><pages>1427-1433</pages><issn>0096-736X</issn><eissn>2577-1531</eissn><abstract>This paper describes preliminary findings on an expert system that uses both operator and transducer inputs in 'almost' real-time to diagnose scrap type and recommend corrective action to reduce/eliminate further production of this scrap type. During the development of the expert system, equal consideration was given to hardware installation and debugging; system architecture, logic, and triggering; and knowledge acquisition. The system is applied to a specific manufacturing process; however, the ideas are applicable to a wide range of problems in the production environment.</abstract><pub>Society of Automotive Engineers, Inc</pub></addata></record>
fulltext fulltext
identifier ISSN: 0096-736X
ispartof SAE transactions, 1987-01, Vol.96, p.1427-1433
issn 0096-736X
2577-1531
language eng
recordid cdi_jstor_primary_44470804
source JSTOR Archival Journals and Primary Sources Collection
subjects Architectural engineering
Architecture
Chalkboards
Computer software
Expert systems
Foams
Knowledge engineering
Machinery
Molding
Transducers
title 'Almost' Real-Time Diagnosis and Correction of Manufacturing Scrap Using an Expert System
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-09-21T09%3A36%3A37IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-jstor&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle='Almost'%20Real-Time%20Diagnosis%20and%20Correction%20of%20Manufacturing%20Scrap%20Using%20an%20Expert%20System&rft.jtitle=SAE%20transactions&rft.au=Chesney,%20David%20R.&rft.date=1987-01-01&rft.volume=96&rft.spage=1427&rft.epage=1433&rft.pages=1427-1433&rft.issn=0096-736X&rft.eissn=2577-1531&rft_id=info:doi/&rft_dat=%3Cjstor%3E44470804%3C/jstor%3E%3Cgrp_id%3Ecdi_FETCH-jstor_primary_444708043%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rft_jstor_id=44470804&rfr_iscdi=true