Loading…
Design Optimization of a Controllable Camber Rotor Airfoil
A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chor...
Saved in:
Published in: | AIAA journal 2008-01, Vol.46 (1), p.142-153 |
---|---|
Main Authors: | , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
cited_by | cdi_FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3 |
---|---|
cites | cdi_FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3 |
container_end_page | 153 |
container_issue | 1 |
container_start_page | 142 |
container_title | AIAA journal |
container_volume | 46 |
creator | Gandhi, Farhan Frecker, Mary Nissly, Andrew |
description | A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of ±6.0 mm or a ±4.6-deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept. [PUBLICATION ABSTRACT] |
doi_str_mv | 10.2514/1.24476 |
format | article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_crossref_primary_10_2514_1_24476</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1416487151</sourcerecordid><originalsourceid>FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3</originalsourceid><addsrcrecordid>eNpt0MtKAzEUBuAgCtYqvsIgiriYmutc3JXxCoWCKLgLmTSRlHQyJhlQn97YFgVxFQ58_P_JAeAYwQlmiF6iCaa0LHbACDFCclKxl10wghCiHFGG98FBCMs04bJCI3B1rYJ57bJ5H83KfIpoXJc5nYmscV30zlrRWpU1YtUqnz266Hw2NV47Yw_BnhY2qKPtOwbPtzdPzX0-m989NNNZLihCMZes1IQgSEgLpYZQY90uirouJZJVwWDBGCUUMlapulpInLavS6qLpBGuipaMwckmt_fubVAh8qUbfJcqOU5fxDWuYELnGyS9C8ErzXtvVsJ_cAT591044uu7JHm2jRNBCqu96KQJPxxDzCBau4uNE0aI38ptDO8XmuvB2qjeY7Kn_9o_1V9oZHiO</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>215329280</pqid></control><display><type>article</type><title>Design Optimization of a Controllable Camber Rotor Airfoil</title><source>Alma/SFX Local Collection</source><creator>Gandhi, Farhan ; Frecker, Mary ; Nissly, Andrew</creator><creatorcontrib>Gandhi, Farhan ; Frecker, Mary ; Nissly, Andrew</creatorcontrib><description>A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of ±6.0 mm or a ±4.6-deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept. [PUBLICATION ABSTRACT]</description><identifier>ISSN: 0001-1452</identifier><identifier>EISSN: 1533-385X</identifier><identifier>DOI: 10.2514/1.24476</identifier><identifier>CODEN: AIAJAH</identifier><language>eng</language><publisher>Reston, VA: American Institute of Aeronautics and Astronautics</publisher><subject>Aerodynamics ; Aircraft ; Deformation ; Design optimization ; Exact sciences and technology ; Finite element analysis ; Fundamental areas of phenomenology (including applications) ; Linear programming ; Physics ; Prototypes ; Solid mechanics ; Structural and continuum mechanics ; Vibration, mechanical wave, dynamic stability (aeroelasticity, vibration control...)</subject><ispartof>AIAA journal, 2008-01, Vol.46 (1), p.142-153</ispartof><rights>2008 INIST-CNRS</rights><rights>Copyright American Institute of Aeronautics and Astronautics Jan 2008</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3</citedby><cites>FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>315,786,790,4043,27956,27957,27958</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=20250176$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Gandhi, Farhan</creatorcontrib><creatorcontrib>Frecker, Mary</creatorcontrib><creatorcontrib>Nissly, Andrew</creatorcontrib><title>Design Optimization of a Controllable Camber Rotor Airfoil</title><title>AIAA journal</title><description>A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of ±6.0 mm or a ±4.6-deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept. [PUBLICATION ABSTRACT]</description><subject>Aerodynamics</subject><subject>Aircraft</subject><subject>Deformation</subject><subject>Design optimization</subject><subject>Exact sciences and technology</subject><subject>Finite element analysis</subject><subject>Fundamental areas of phenomenology (including applications)</subject><subject>Linear programming</subject><subject>Physics</subject><subject>Prototypes</subject><subject>Solid mechanics</subject><subject>Structural and continuum mechanics</subject><subject>Vibration, mechanical wave, dynamic stability (aeroelasticity, vibration control...)</subject><issn>0001-1452</issn><issn>1533-385X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2008</creationdate><recordtype>article</recordtype><recordid>eNpt0MtKAzEUBuAgCtYqvsIgiriYmutc3JXxCoWCKLgLmTSRlHQyJhlQn97YFgVxFQ58_P_JAeAYwQlmiF6iCaa0LHbACDFCclKxl10wghCiHFGG98FBCMs04bJCI3B1rYJ57bJ5H83KfIpoXJc5nYmscV30zlrRWpU1YtUqnz266Hw2NV47Yw_BnhY2qKPtOwbPtzdPzX0-m989NNNZLihCMZes1IQgSEgLpYZQY90uirouJZJVwWDBGCUUMlapulpInLavS6qLpBGuipaMwckmt_fubVAh8qUbfJcqOU5fxDWuYELnGyS9C8ErzXtvVsJ_cAT591044uu7JHm2jRNBCqu96KQJPxxDzCBau4uNE0aI38ptDO8XmuvB2qjeY7Kn_9o_1V9oZHiO</recordid><startdate>200801</startdate><enddate>200801</enddate><creator>Gandhi, Farhan</creator><creator>Frecker, Mary</creator><creator>Nissly, Andrew</creator><general>American Institute of Aeronautics and Astronautics</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7TB</scope><scope>8FD</scope><scope>FR3</scope><scope>H8D</scope><scope>L7M</scope></search><sort><creationdate>200801</creationdate><title>Design Optimization of a Controllable Camber Rotor Airfoil</title><author>Gandhi, Farhan ; Frecker, Mary ; Nissly, Andrew</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2008</creationdate><topic>Aerodynamics</topic><topic>Aircraft</topic><topic>Deformation</topic><topic>Design optimization</topic><topic>Exact sciences and technology</topic><topic>Finite element analysis</topic><topic>Fundamental areas of phenomenology (including applications)</topic><topic>Linear programming</topic><topic>Physics</topic><topic>Prototypes</topic><topic>Solid mechanics</topic><topic>Structural and continuum mechanics</topic><topic>Vibration, mechanical wave, dynamic stability (aeroelasticity, vibration control...)</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Gandhi, Farhan</creatorcontrib><creatorcontrib>Frecker, Mary</creatorcontrib><creatorcontrib>Nissly, Andrew</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Aerospace Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>AIAA journal</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Gandhi, Farhan</au><au>Frecker, Mary</au><au>Nissly, Andrew</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Design Optimization of a Controllable Camber Rotor Airfoil</atitle><jtitle>AIAA journal</jtitle><date>2008-01</date><risdate>2008</risdate><volume>46</volume><issue>1</issue><spage>142</spage><epage>153</epage><pages>142-153</pages><issn>0001-1452</issn><eissn>1533-385X</eissn><coden>AIAJAH</coden><abstract>A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of ±6.0 mm or a ±4.6-deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept. [PUBLICATION ABSTRACT]</abstract><cop>Reston, VA</cop><pub>American Institute of Aeronautics and Astronautics</pub><doi>10.2514/1.24476</doi><tpages>12</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0001-1452 |
ispartof | AIAA journal, 2008-01, Vol.46 (1), p.142-153 |
issn | 0001-1452 1533-385X |
language | eng |
recordid | cdi_crossref_primary_10_2514_1_24476 |
source | Alma/SFX Local Collection |
subjects | Aerodynamics Aircraft Deformation Design optimization Exact sciences and technology Finite element analysis Fundamental areas of phenomenology (including applications) Linear programming Physics Prototypes Solid mechanics Structural and continuum mechanics Vibration, mechanical wave, dynamic stability (aeroelasticity, vibration control...) |
title | Design Optimization of a Controllable Camber Rotor Airfoil |
url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-09-22T19%3A21%3A27IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Design%20Optimization%20of%20a%20Controllable%20Camber%20Rotor%20Airfoil&rft.jtitle=AIAA%20journal&rft.au=Gandhi,%20Farhan&rft.date=2008-01&rft.volume=46&rft.issue=1&rft.spage=142&rft.epage=153&rft.pages=142-153&rft.issn=0001-1452&rft.eissn=1533-385X&rft.coden=AIAJAH&rft_id=info:doi/10.2514/1.24476&rft_dat=%3Cproquest_cross%3E1416487151%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-a411t-c57f331033b0cf00f2fbd6997c1c86506554340558e98dc2244974f6b0c1286b3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=215329280&rft_id=info:pmid/&rfr_iscdi=true |