Loading…
Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications
Unconventional renewable energy sources are scarce and have not been explored thoroughly or exploited. The photosynthetic power cell (PSC) is one among them. Though there are few prototypes fabricated earlier, there has not been a comprehensive electrical equivalent model developed. This paper propo...
Saved in:
Published in: | IEEE transactions on power electronics 2015-03, Vol.30 (3), p.1275-1285 |
---|---|
Main Authors: | , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
cited_by | cdi_FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563 |
---|---|
cites | cdi_FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563 |
container_end_page | 1285 |
container_issue | 3 |
container_start_page | 1275 |
container_title | IEEE transactions on power electronics |
container_volume | 30 |
creator | Ramanan, Arvind Vyas Pakirisamy, Muthukumaran Williamson, Sheldon S. |
description | Unconventional renewable energy sources are scarce and have not been explored thoroughly or exploited. The photosynthetic power cell (PSC) is one among them. Though there are few prototypes fabricated earlier, there has not been a comprehensive electrical equivalent model developed. This paper proposes an electrical equivalent model for a microphotosynthetic power cell (μPSC), which is tested and authenticated with experimental verification on a fabricated prototype. The developed model is further used for testing emulation behavior, to efficiently and accurately design an energy harvesting power electronic converter. The principle of the operation of the device is based on "photosynthesis." Photosynthesis and respiration both involve an electron transfer chain. The electrons are extracted with the help of electrodes and a redox agent, and a power electronic converter is designed to harvest the energy. The fabricated cell is capable of producing an open-circuit voltage of 0.9 V and about 200 μW of peak power. The μPSC has an active area of 4.84 cm 2 , which approximately translates to a power density of 400 mW/m 2 . This makes it as one of the best-performing μPSC. The other top-performing μPSC devices report power densities of between 100 and 250 mW/m 2 . The PSC produces energy under both dark and light conditions. |
doi_str_mv | 10.1109/TPEL.2014.2317675 |
format | article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1109_TPEL_2014_2317675</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>6798665</ieee_id><sourcerecordid>1642258929</sourcerecordid><originalsourceid>FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563</originalsourceid><addsrcrecordid>eNqNkU9LwzAYxoMoOKcfQLwEvHhYZ5I2aXIcY3PChh7muaTp263SNTXpBgM_vCkbHjx5ennh9zzvnwehe0rGlBL1vH6fLceM0GTMYpqKlF-gAVUJjQgl6SUaECl5JJWKr9GN958kkJzQAfqeFAfdGCjwXOeuMrqrbDPCK1tAXTWbEdZNgdfgu9BgW2KNV5Vxtt3azvpj022hqwye1WA6Z80WdsGixlOoa1xah2cNuM0RL7Q7nD0mbVufx_hbdFXq2sPduQ7Rx3y2ni6i5dvL63SyjEzMVRcJJlRaahobkuQxg0IqI7TQJVMCdClEziUkkDPGC5pIbRLJCx3nYIAqzkU8RE8n39bZr31YJNtV3oQddQN27zMqkqCViql_oAHiigsZ0Mc_6KfduyYcEigqZZIy2c-mJyp8zXsHZda6aqfdMaMk66PL-uiyPrrsHF3QPJw0FQD88iJVUgge_wARdJXy</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1618847286</pqid></control><display><type>article</type><title>Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications</title><source>IEEE Electronic Library (IEL) Journals</source><creator>Ramanan, Arvind Vyas ; Pakirisamy, Muthukumaran ; Williamson, Sheldon S.</creator><creatorcontrib>Ramanan, Arvind Vyas ; Pakirisamy, Muthukumaran ; Williamson, Sheldon S.</creatorcontrib><description>Unconventional renewable energy sources are scarce and have not been explored thoroughly or exploited. The photosynthetic power cell (PSC) is one among them. Though there are few prototypes fabricated earlier, there has not been a comprehensive electrical equivalent model developed. This paper proposes an electrical equivalent model for a microphotosynthetic power cell (μPSC), which is tested and authenticated with experimental verification on a fabricated prototype. The developed model is further used for testing emulation behavior, to efficiently and accurately design an energy harvesting power electronic converter. The principle of the operation of the device is based on "photosynthesis." Photosynthesis and respiration both involve an electron transfer chain. The electrons are extracted with the help of electrodes and a redox agent, and a power electronic converter is designed to harvest the energy. The fabricated cell is capable of producing an open-circuit voltage of 0.9 V and about 200 μW of peak power. The μPSC has an active area of 4.84 cm 2 , which approximately translates to a power density of 400 mW/m 2 . This makes it as one of the best-performing μPSC. The other top-performing μPSC devices report power densities of between 100 and 250 mW/m 2 . The PSC produces energy under both dark and light conditions.</description><identifier>ISSN: 0885-8993</identifier><identifier>EISSN: 1941-0107</identifier><identifier>DOI: 10.1109/TPEL.2014.2317675</identifier><identifier>CODEN: ITPEE8</identifier><language>eng</language><publisher>New York: IEEE</publisher><subject>Algae ; Alternative energy ; Cathodes ; Chemistry ; Density ; Devices ; Direct power generation ; Electric power generation ; Electrodes ; Electronics ; Emulation ; Energy harvesting ; Harvesting ; Performance evaluation ; Photonics ; Photosynthesis ; Power electronics ; Prototypes ; Testing</subject><ispartof>IEEE transactions on power electronics, 2015-03, Vol.30 (3), p.1275-1285</ispartof><rights>Copyright The Institute of Electrical and Electronics Engineers, Inc. (IEEE) Mar 2015</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563</citedby><cites>FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/6798665$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>315,786,790,27957,27958,55147</link.rule.ids></links><search><creatorcontrib>Ramanan, Arvind Vyas</creatorcontrib><creatorcontrib>Pakirisamy, Muthukumaran</creatorcontrib><creatorcontrib>Williamson, Sheldon S.</creatorcontrib><title>Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications</title><title>IEEE transactions on power electronics</title><addtitle>TPEL</addtitle><description>Unconventional renewable energy sources are scarce and have not been explored thoroughly or exploited. The photosynthetic power cell (PSC) is one among them. Though there are few prototypes fabricated earlier, there has not been a comprehensive electrical equivalent model developed. This paper proposes an electrical equivalent model for a microphotosynthetic power cell (μPSC), which is tested and authenticated with experimental verification on a fabricated prototype. The developed model is further used for testing emulation behavior, to efficiently and accurately design an energy harvesting power electronic converter. The principle of the operation of the device is based on "photosynthesis." Photosynthesis and respiration both involve an electron transfer chain. The electrons are extracted with the help of electrodes and a redox agent, and a power electronic converter is designed to harvest the energy. The fabricated cell is capable of producing an open-circuit voltage of 0.9 V and about 200 μW of peak power. The μPSC has an active area of 4.84 cm 2 , which approximately translates to a power density of 400 mW/m 2 . This makes it as one of the best-performing μPSC. The other top-performing μPSC devices report power densities of between 100 and 250 mW/m 2 . The PSC produces energy under both dark and light conditions.</description><subject>Algae</subject><subject>Alternative energy</subject><subject>Cathodes</subject><subject>Chemistry</subject><subject>Density</subject><subject>Devices</subject><subject>Direct power generation</subject><subject>Electric power generation</subject><subject>Electrodes</subject><subject>Electronics</subject><subject>Emulation</subject><subject>Energy harvesting</subject><subject>Harvesting</subject><subject>Performance evaluation</subject><subject>Photonics</subject><subject>Photosynthesis</subject><subject>Power electronics</subject><subject>Prototypes</subject><subject>Testing</subject><issn>0885-8993</issn><issn>1941-0107</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNqNkU9LwzAYxoMoOKcfQLwEvHhYZ5I2aXIcY3PChh7muaTp263SNTXpBgM_vCkbHjx5ennh9zzvnwehe0rGlBL1vH6fLceM0GTMYpqKlF-gAVUJjQgl6SUaECl5JJWKr9GN958kkJzQAfqeFAfdGCjwXOeuMrqrbDPCK1tAXTWbEdZNgdfgu9BgW2KNV5Vxtt3azvpj022hqwye1WA6Z80WdsGixlOoa1xah2cNuM0RL7Q7nD0mbVufx_hbdFXq2sPduQ7Rx3y2ni6i5dvL63SyjEzMVRcJJlRaahobkuQxg0IqI7TQJVMCdClEziUkkDPGC5pIbRLJCx3nYIAqzkU8RE8n39bZr31YJNtV3oQddQN27zMqkqCViql_oAHiigsZ0Mc_6KfduyYcEigqZZIy2c-mJyp8zXsHZda6aqfdMaMk66PL-uiyPrrsHF3QPJw0FQD88iJVUgge_wARdJXy</recordid><startdate>20150301</startdate><enddate>20150301</enddate><creator>Ramanan, Arvind Vyas</creator><creator>Pakirisamy, Muthukumaran</creator><creator>Williamson, Sheldon S.</creator><general>IEEE</general><general>The Institute of Electrical and Electronics Engineers, Inc. (IEEE)</general><scope>97E</scope><scope>RIA</scope><scope>RIE</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>7TB</scope><scope>8FD</scope><scope>FR3</scope><scope>JQ2</scope><scope>KR7</scope><scope>L7M</scope><scope>F28</scope></search><sort><creationdate>20150301</creationdate><title>Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications</title><author>Ramanan, Arvind Vyas ; Pakirisamy, Muthukumaran ; Williamson, Sheldon S.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>Algae</topic><topic>Alternative energy</topic><topic>Cathodes</topic><topic>Chemistry</topic><topic>Density</topic><topic>Devices</topic><topic>Direct power generation</topic><topic>Electric power generation</topic><topic>Electrodes</topic><topic>Electronics</topic><topic>Emulation</topic><topic>Energy harvesting</topic><topic>Harvesting</topic><topic>Performance evaluation</topic><topic>Photonics</topic><topic>Photosynthesis</topic><topic>Power electronics</topic><topic>Prototypes</topic><topic>Testing</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Ramanan, Arvind Vyas</creatorcontrib><creatorcontrib>Pakirisamy, Muthukumaran</creatorcontrib><creatorcontrib>Williamson, Sheldon S.</creatorcontrib><collection>IEEE All-Society Periodicals Package (ASPP) 2005-present</collection><collection>IEEE All-Society Periodicals Package (ASPP) 1998-Present</collection><collection>IEEE Xplore</collection><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>ProQuest Computer Science Collection</collection><collection>Civil Engineering Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><jtitle>IEEE transactions on power electronics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Ramanan, Arvind Vyas</au><au>Pakirisamy, Muthukumaran</au><au>Williamson, Sheldon S.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications</atitle><jtitle>IEEE transactions on power electronics</jtitle><stitle>TPEL</stitle><date>2015-03-01</date><risdate>2015</risdate><volume>30</volume><issue>3</issue><spage>1275</spage><epage>1285</epage><pages>1275-1285</pages><issn>0885-8993</issn><eissn>1941-0107</eissn><coden>ITPEE8</coden><notes>ObjectType-Article-1</notes><notes>SourceType-Scholarly Journals-1</notes><notes>ObjectType-Feature-2</notes><notes>content type line 23</notes><abstract>Unconventional renewable energy sources are scarce and have not been explored thoroughly or exploited. The photosynthetic power cell (PSC) is one among them. Though there are few prototypes fabricated earlier, there has not been a comprehensive electrical equivalent model developed. This paper proposes an electrical equivalent model for a microphotosynthetic power cell (μPSC), which is tested and authenticated with experimental verification on a fabricated prototype. The developed model is further used for testing emulation behavior, to efficiently and accurately design an energy harvesting power electronic converter. The principle of the operation of the device is based on "photosynthesis." Photosynthesis and respiration both involve an electron transfer chain. The electrons are extracted with the help of electrodes and a redox agent, and a power electronic converter is designed to harvest the energy. The fabricated cell is capable of producing an open-circuit voltage of 0.9 V and about 200 μW of peak power. The μPSC has an active area of 4.84 cm 2 , which approximately translates to a power density of 400 mW/m 2 . This makes it as one of the best-performing μPSC. The other top-performing μPSC devices report power densities of between 100 and 250 mW/m 2 . The PSC produces energy under both dark and light conditions.</abstract><cop>New York</cop><pub>IEEE</pub><doi>10.1109/TPEL.2014.2317675</doi><tpages>11</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0885-8993 |
ispartof | IEEE transactions on power electronics, 2015-03, Vol.30 (3), p.1275-1285 |
issn | 0885-8993 1941-0107 |
language | eng |
recordid | cdi_crossref_primary_10_1109_TPEL_2014_2317675 |
source | IEEE Electronic Library (IEL) Journals |
subjects | Algae Alternative energy Cathodes Chemistry Density Devices Direct power generation Electric power generation Electrodes Electronics Emulation Energy harvesting Harvesting Performance evaluation Photonics Photosynthesis Power electronics Prototypes Testing |
title | Advanced Fabrication, Modeling, and Testing of a Microphotosynthetic Electrochemical Cell for Energy Harvesting Applications |
url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-09-22T20%3A22%3A42IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Advanced%20Fabrication,%20Modeling,%20and%20Testing%20of%20a%20Microphotosynthetic%20Electrochemical%20Cell%20for%20Energy%20Harvesting%20Applications&rft.jtitle=IEEE%20transactions%20on%20power%20electronics&rft.au=Ramanan,%20Arvind%20Vyas&rft.date=2015-03-01&rft.volume=30&rft.issue=3&rft.spage=1275&rft.epage=1285&rft.pages=1275-1285&rft.issn=0885-8993&rft.eissn=1941-0107&rft.coden=ITPEE8&rft_id=info:doi/10.1109/TPEL.2014.2317675&rft_dat=%3Cproquest_cross%3E1642258929%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c359t-62697fa13c04b32ed89c6a6af296eaf66b58e4eb225d148ac485da3bece195563%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=1618847286&rft_id=info:pmid/&rft_ieee_id=6798665&rfr_iscdi=true |